PartsTable
Technical Data Sheet
Download PDF

MS16995-18 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS16995-18: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 384 OR STEEL COMP 304L OR STEEL COMP XM-7 OVERALL, head_style: FLAT CHAMFER, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-959-1082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS16995-18
NSN: 5305-00-959-1082
NIINs: 009591082, 014974166
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 384 OR STEEL COMP 304L OR STEEL COMP XM-7 OVERALL
head_styleFLAT CHAMFER
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL IN
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.111 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.138 INCHES IN
NSN5305-00-959-1082
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS16995-18 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.403 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
FASTENER LENGTH0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.403 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY CONDITION A
SUBSTITUTES & CROSS-REFERENCES 9
5305009591082Reference document
Same NSN cross-reference
Reference document — Secondary reference
43S4365-176Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B68152Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
207-1020P13Reference document
Same NSN cross-reference
Reference document — Secondary reference
291-608SSReference document
Same NSN cross-reference
Reference document — Secondary reference
418262-18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS16995-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS16995-18?
MS16995-18 is a SCREW,CAP,SOCKET HEAD.
What parts can replace MS16995-18?
There are 9 known substitutes for MS16995-18: 5305009591082, 43S4365-176, B68152 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS16995-18?
MS16995-18 is cataloged in the U.S. Government catalog under NSN 5305-00-959-1082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS16995-18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.