PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS16992-528-M
MS16992-528-M ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,LAG is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.203 INCHES NOMINAL IN, fastener_length: 4.000 INCHES NOMINAL IN, surface_treatment: PHOSPHATE OVERALL, width_between_flats: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-058-2971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS16992-528-M
NSN: 5305-00-058-2971
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.203 INCHES NOMINAL IN
fastener_length4.000 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
width_between_flats0.500 INCHES NOMINAL IN
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.312 INCHES IN
NSN5305-00-058-2971
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS16992-528-M · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.203 INCHES NOMINAL IN
•
HEAD STYLE: HEXAGON
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
FASTENER LENGTH: 4.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
MATERIAL: STEEL OVERALL
•
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.203 INCHES NOMINAL IN
HEAD STYLEHEXAGON
NONMACHINE NOMINAL THREAD DIAMETER0.312 INCHES IN
FASTENER LENGTH4.000 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE OVERALL
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
MATERIALSTEEL OVERALL
WIDTH BETWEEN FLATS0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
ANSI B18.2.1Interchangeable
interchangeable cross-reference
interchangeable
1065Interchangeable
interchangeable cross-reference
interchangeable
MS16992-528Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS16992-528-M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS16992-528-M?
MS16992-528-M is a SCREW,LAG.
What parts can replace MS16992-528-M?
There are 3 known substitutes for MS16992-528-M: ANSI B18.2.1, 1065, MS16992-528. Substitute compatibility should be verified for your specific system.
What is the NSN for MS16992-528-M?
MS16992-528-M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-058-2971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS16992-528-M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026