PartsTable
Technical Data Sheet
Download PDF

MS16555-60 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS16555-60: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shear_strength: 28000 DOUBLE POUND, first_end_style: CHAMFERED, hardness_rating: 47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS, special_features: RADIUS END MAY BE CHAMFERED 25.0 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-820-8051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS16555-60
NSN: 5315-00-820-8051
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shear_strength28000 DOUBLE POUND
first_end_styleCHAMFERED
hardness_rating47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
special_featuresRADIUS END MAY BE CHAMFERED 25.0 DEGREES
features_providedCASEHARDENED
pin_overall_length1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
pin_overall_diameter0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
first_end_taper_angle4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
first_end_taper_length0.101 INCHES NOMINAL IN
second_end_corner_radius0.047 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NSN5315-00-820-8051
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS16555-60 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.101 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A29 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.101 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
HARDNESS RATING47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A29 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FEATURES PROVIDEDCASEHARDENED
SPECIAL FEATURESRADIUS END MAY BE CHAMFERED 25.0 DEGREES
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315008208051Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS16555-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS16555-60?
MS16555-60 is a PIN,STRAIGHT,HEADLESS.
What parts can replace MS16555-60?
There is 1 known substitute for MS16555-60: 5315008208051. Substitute compatibility should be verified for your specific system.
What is the NSN for MS16555-60?
MS16555-60 is cataloged in the U.S. Government catalog under NSN 5315-00-820-8051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS16555-60