PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS15795-818 CRE S 304 ONLY
MS15795-818 CRE S 304 ONLY ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, thickness: 0.095 INCHES NOMINAL IN, hole_diameter: 0.531 INCHES NOMINAL IN, overall_diameter: 1.062 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-422-4479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS15795-818 CRE S 304 ONLY
NSN: 5310-01-422-4479
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
thickness0.095 INCHES NOMINAL IN
hole_diameter0.531 INCHES NOMINAL IN
overall_diameter1.062 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
departure_from_cited_documentAS MODIFIED BY MATERIAL.
NSN5310-01-422-4479
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS15795-818 CRE S 304 ONLY · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL.
•
OVERALL DIAMETER: 1.062 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
THICKNESS: 0.095 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL: STEEL COMP 304 OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL.
OVERALL DIAMETER1.062 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.095 INCHES NOMINAL IN
HOLE DIAMETER0.531 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIALSTEEL COMP 304 OVERALL
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
530-540Interchangeable
interchangeable cross-reference
interchangeable
DE094Interchangeable
interchangeable cross-reference
interchangeable
ANSI B18.22.1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS15795-818 CRE S 304 ONLY?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15795-818 CRE S 304 ONLY?
MS15795-818 CRE S 304 ONLY is a WASHER,FLAT.
What parts can replace MS15795-818 CRE S 304 ONLY?
There are 3 known substitutes for MS15795-818 CRE S 304 ONLY: 530-540, DE094, ANSI B18.22.1. Substitute compatibility should be verified for your specific system.
What is the NSN for MS15795-818 CRE S 304 ONLY?
MS15795-818 CRE S 304 ONLY is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-422-4479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS15795-818 CRE S 304 ONLY

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026