PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS15795-810D7
MS15795-810D7 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.065 INCHES NOMINAL IN, hole_diameter: 0.625 INCHES NOMINAL IN, overall_diameter: 0.625 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-733-9773, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS15795-810D7
NSN: 5310-01-733-9773
FSC: 5310
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.065 INCHES NOMINAL IN
hole_diameter0.625 INCHES NOMINAL IN
overall_diameter0.625 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
hole_width_across_flats0.281 INCHES NOMINAL IN
environmental_protectionCORROSION RESISTANT
cross-sectional_shape_styleRECTANGULAR
criticality_code_justificationZZZY
part_name_assigned_by_controlling_agencyWASHER, FLAT-ROUND GENERAL PURPOSE
NSN5310-01-733-9773
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS15795-810D7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL CONTROLLED IAW SS800-AG-MAN-010/P-9290 SYSTEM CERTIFICATION PROCEDURES AND CRITERIA MANUAL FOR DEEP SUBMERGENCE SYSTEMS; CRITICAL ITEM FOR SAFETY AND SURVIVAL OF DEEP SUBMERGENCE RESEARCH AND RESCUE VEHICLES AS DIFFERENTIATED BY SPECIAL TEST FEATURES
•
OVERALL DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE WIDTH ACROSS FLATS: 0.281 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL CONTROLLED IAW SS800-AG-MAN-010/P-9290 SYSTEM CERTIFICATION PROCEDURES AND CRITERIA MANUAL FOR DEEP SUBMERGENCE SYSTEMS; CRITICAL ITEM FOR SAFETY AND SURVIVAL OF DEEP SUBMERGENCE RESEARCH AND RESCUE VEHICLES AS DIFFERENTIATED BY SPECIAL TEST FEATURES
OVERALL DIAMETER0.625 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
PERIPHERAL SHAPE STYLEROUND
HOLE WIDTH ACROSS FLATS0.281 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER, FLAT-ROUND GENERAL PURPOSE
CENTER HOLE SHAPE STYLEROUND
CRITICALITY CODE JUSTIFICATIONZZZY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
790-011Interchangeable
interchangeable cross-reference
interchangeable
10121525Interchangeable
interchangeable cross-reference
interchangeable
5310PL0724748Interchangeable
interchangeable cross-reference
interchangeable
950508Interchangeable
interchangeable cross-reference
interchangeable
1-480464-0Interchangeable
interchangeable cross-reference
interchangeable
0.625ODX0.281ID X0.065THK CRES3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS15795-810D7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15795-810D7?
MS15795-810D7 is a WASHER,FLAT.
What parts can replace MS15795-810D7?
There are 10 known substitutes for MS15795-810D7: 790-011, 10121525, 5310PL0724748 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS15795-810D7?
MS15795-810D7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-733-9773. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS15795-810D7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026