PartsTable
Technical Data Sheet
Download PDF

MS15795-804 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS15795-804: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.025 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, hole_diameter: 0.120 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, overall_diameter: 0.307 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-782-1349, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS15795-804
NSN: 5310-00-782-1349
NIINs: 007821349, 009651802, 015927881
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.025 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
hole_diameter0.120 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
overall_diameter0.307 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification5895-01-561-3705 SATELLITE COMMUNICATION SUBSYSTEM
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyWASHER, FLAT, METAL, ROUND GENERAL PURPOSE
NSN5310-00-782-1349
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS15795-804 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 8
5310PL0125508Reference document
Same NSN cross-reference
Reference document — Informative reference only
36038-3408Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AN96004Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
946008-8040Reference document
Same NSN cross-reference
Reference document — Secondary reference
411027-804Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
236-1149P5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS15795-804?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15795-804?
MS15795-804 is a WASHER,FLAT.
What parts can replace MS15795-804?
There are 8 known substitutes for MS15795-804: 5310PL0125508, 36038-3408, AN96004 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS15795-804?
MS15795-804 is cataloged in the U.S. Government catalog under NSN 5310-00-782-1349. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS15795-804