PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS15795-541
MS15795-541 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, thickness: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, hole_diameter: 0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN, overall_diameter: 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-083-7088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS15795-541
NSN: 5310-00-083-7088
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
thickness0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
hole_diameter0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
overall_diameter0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 1 GRADE AND F CLASS
material_document_and_classificationQQ-C-576,COLD ROLLED,HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-083-7088
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS15795-541 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576,COLD ROLLED,HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
HOLE DIAMETER: 0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 1 GRADE AND F CLASS
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576,COLD ROLLED,HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND F CLASS
CENTER HOLE SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
SP4698Interchangeable
interchangeable cross-reference
interchangeable
FFW92TYPEAGRADE1CLASSFInterchangeable
interchangeable cross-reference
interchangeable
51176PC9Interchangeable
interchangeable cross-reference
interchangeable
116103Interchangeable
interchangeable cross-reference
interchangeable
6382DFB6382AInterchangeable
interchangeable cross-reference
interchangeable
5179709Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS15795-541?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15795-541?
MS15795-541 is a WASHER,FLAT.
What parts can replace MS15795-541?
There are 13 known substitutes for MS15795-541: SP4698, FFW92TYPEAGRADE1CLASSF, 51176PC9 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS15795-541?
MS15795-541 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-083-7088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS15795-541

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026