PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS15795-218
MS15795-218 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, hole_diameter: 0.526 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN, overall_diameter: 1.055 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-637-8368, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS15795-218
NSN: 5310-00-637-8368
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
hole_diameter0.526 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN
overall_diameter1.055 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 1 GRADE AND A CLASS
departure_from_cited_documentAS MODIFIED BY THE FINISH
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-637-8368
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS15795-218 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND ZINC OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND ZINC OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER1.062 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
904233Interchangeable
interchangeable cross-reference
interchangeable
PL-H691D001 REV B IT NO 23Interchangeable
interchangeable cross-reference
interchangeable
MS15795-18Interchangeable
interchangeable cross-reference
interchangeable
0740656Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS15795-218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15795-218?
MS15795-218 is a WASHER,FLAT.
What parts can replace MS15795-218?
There are 4 known substitutes for MS15795-218: 904233, PL-H691D001 REV B IT NO 23, MS15795-18 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS15795-218?
MS15795-218 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-637-8368. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS15795-218

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026