PartsTable
Technical Data Sheet
Download PDF

MS15699-11 — CUTTER,MILLING,CONVEX

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MS15699-11: CUTTER,MILLING,CONVEX.

The CUTTER,MILLING,CONVEX is a the manufacturer industrial component. Key specifications include guide: NOT INCLUDED, diameter: 0.625 INCHES NOMINAL IN, material: RUBBER NATURAL, end_style: MACHINE LOOP BOTH ENDS, flute_type: INTEGRAL, shank_type: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 3455-00-254-8468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS15699-11
NSN: 3455-00-254-8468
FSC: 3455 — Cutting Tools for Machine Tools
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
guideNOT INCLUDED
diameter0.625 INCHES NOMINAL IN
materialRUBBER NATURAL
end_styleMACHINE LOOP BOTH ENDS
flute_typeINTEGRAL
shank_typeSTRAIGHT
body_length6.438 INCHES MINIMUM AND 6.562 INCHES MAXIMUM IN
design_typeCLOSED
load_rating45.00 POUNDS MINIMUM AND 49.50 POUNDS MAXIMUM LBS
reamer_typeFLUTED CHUCKING
flute_designSTRAIGHT
flute_length2.250 INCHES NOMINAL IN
NSN3455-00-254-8468
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER,MILLING,CONVEX TITLE COMPONENT PN MS15699-11 MFR CUTTER,MILLING,CONVEX
SUBSTITUTES & CROSS-REFERENCES 8
45175Reference document
Same NSN cross-reference
Reference document — Secondary reference
53160Reference document
Same NSN cross-reference
Reference document — Secondary reference
1865Reference document
Same NSN cross-reference
Reference document — Secondary reference
GGG-C-755Reference document
Same NSN cross-reference
Reference document — Secondary reference
812C-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
17562Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS15699-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15699-11?
MS15699-11 is a CUTTER,MILLING,CONVEX.
What parts can replace MS15699-11?
There are 8 known substitutes for MS15699-11: 45175, 53160, 1865 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS15699-11?
MS15699-11 is cataloged in the U.S. Government catalog under NSN 3455-00-254-8468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS15699-11