PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS15691-3
MS15691-3 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The CUTTER,MILLING,SIDE is a the manufacturer industrial component. Key specifications include material: STEEL, face_width: 0.375 INCHES NOMINAL IN, tooth_type: INTEGRAL, outside_diameter: 2.500 INCHES NOMINAL IN, tooth_arrangement: STAGGERED, mounting_hole_diameter: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3455-00-232-9031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS15691-3
NSN: 3455-00-232-9031
FSC: 3455
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL
face_width0.375 INCHES NOMINAL IN
tooth_typeINTEGRAL
outside_diameter2.500 INCHES NOMINAL IN
tooth_arrangementSTAGGERED
mounting_hole_diameter0.875 INCHES NOMINAL IN
nondefinitive_spec/std_data2 TYPE AND 3 CLASS
NSN3455-00-232-9031
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER,MILLING,SIDE TITLE COMPONENT PN MS15691-3 MFR CUTTER,MILLING,SIDE
KEY FEATURES
•
TOOTH ARRANGEMENT: STAGGERED
•
MATERIAL: STEEL
•
OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.875 INCHES NOMINAL IN
•
TOOTH TYPE: INTEGRAL
•
FACE WIDTH: 0.375 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 3 CLASS
TECHNICAL CHARACTERISTICS (FLIS)
TOOTH ARRANGEMENTSTAGGERED
MATERIALSTEEL
OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.875 INCHES NOMINAL IN
TOOTH TYPEINTEGRAL
FACE WIDTH0.375 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 3 CLASS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
GGGC755TYPE2CLASS3Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 5Interchangeable
interchangeable cross-reference
interchangeable
11316Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS15691-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15691-3?
MS15691-3 is a CUTTER,MILLING,SIDE.
What parts can replace MS15691-3?
There are 3 known substitutes for MS15691-3: GGGC755TYPE2CLASS3, B94.19 TABLE 5, 11316. Substitute compatibility should be verified for your specific system.
What is the NSN for MS15691-3?
MS15691-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3455-00-232-9031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS15691-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026