PartsTable / COMPONENT / MS15612-4
MS15612-4
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
INSTALLATION KIT,ELECTRONIC EQUI. Key specifications include material: STEEL CASE, base_style: MIDGET SCREWMIDGET SCREW, bulb_style: T (TUBULAR)T (TUBULAR), case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, overall_length: 0.594 INCHES MAXIMUM0.594 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-246-4060, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS15612-4
NSN: 5330-00-246-4060 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material STEEL CASE base_style MIDGET SCREWMIDGET SCREW bulb_style T (TUBULAR)T (TUBULAR) case_style SQUARE seal_width 0.250 INCHES NOMINAL IN overall_length 0.594 INCHES MAXIMUM0.594 INCHES MAXIMUM IN voltage_rating 2.500 VOLTS NOMINAL2.500 VOLTS NOMINAL wattage_rating 0.500 WATTS0.500 WATTS bulb_designator T-1 3/4T-1 3/4 outside_diameter 1.003 INCHES NOMINAL IN surface_treatment PLASTIC CASE rated_average_life HOURSHOURS NSN 5330-00-246-4060
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: MS15612-4
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 1.003 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SURFACE TREATMENT: PLASTIC CASE
• SEALING ELEMENT STYLE: ANGULAR
• HOUSING BORE DIAMETER: 0.999 INCHES NOMINAL IN
• SEAL WIDTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 1.003 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL STEEL CASE MATERIAL RUBBER SYNTHETIC SEALING ELEMENT SURFACE TREATMENT PLASTIC CASE SEALING ELEMENT STYLE ANGULAR HOUSING BORE DIAMETER 0.999 INCHES NOMINAL IN SEAL WIDTH 0.250 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 0.500 INCHES NOMINAL IN CASE STYLE SQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
62004 Interchangeable interchangeable cross-reference
interchangeable
X3250-17 Interchangeable interchangeable cross-reference
interchangeable
4990 Interchangeable interchangeable cross-reference
interchangeable
26437 Interchangeable interchangeable cross-reference
interchangeable
83977 Interchangeable interchangeable cross-reference
interchangeable
15A1395-1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy MS15612-4?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS15612-4?
MS15612-4 is a INSTALLATION KIT,ELECTRONIC EQUI.
What parts can replace MS15612-4?
There are 18 known substitutes for MS15612-4: 62004, X3250-17, 4990 and 15 more. Substitute compatibility should be verified for your specific system.
Is MS15612-4 still available?
MS15612-4 is currently cancelled.
Request a Quote — MS15612-4