MS14183C8 — WASHER,FLAT

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS14183C8: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, thickness: 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN, hole_diameter: 0.501 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, hardness_rating: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM, outside_diameter: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN, special_features: RECESS DIAMETER: 0.614 IN. MIN.

AND 0.624 IN. MAX.;RECESS ANGLE: 90.0 DEG. NOM.;STYLE DESIGNATOR: RECESSED IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-01-306-7880, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS14183C8

NSN: 5310-01-306-7880
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	NICKEL ALLOY 718 OVERALL
thickness	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
hole_diameter	0.501 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
hardness_rating	36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
outside_diameter	0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN
special_features	RECESS DIAMETER: 0.614 IN. MIN. AND 0.624 IN. MAX.;RECESS ANGLE: 90.0 DEG. NOM.;STYLE DESIGNATOR: RECESSED IN
material_document_and_classification	AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5597 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-01-306-7880

COMPONENT DIAGRAM

KEY FEATURES

•

HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5597 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN

•

MATERIAL: NICKEL ALLOY 718 OVERALL

•

HOLE DIAMETER: 0.501 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN

•

THICKNESS: 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5597 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM IN
SPECIAL FEATURES	RECESS DIAMETER: 0.614 IN. MIN. AND 0.624 IN. MAX.;RECESS ANGLE: 90.0 DEG. NOM.;STYLE DESIGNATOR: RECESSED IN
MATERIAL	NICKEL ALLOY 718 OVERALL
HOLE DIAMETER	0.501 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
THICKNESS	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

MS14183L-C8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

NASM14183Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy MS14183C8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS14183C8?

MS14183C8 is a WASHER,FLAT.

What parts can replace MS14183C8?

There are 2 known substitutes for MS14183C8: MS14183L-C8, NASM14183. Substitute compatibility should be verified for your specific system.

What is the NSN for MS14183C8?

MS14183C8 is cataloged in the U.S. Government catalog under NSN 5310-01-306-7880. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS14183C8 — WASHER,FLAT

Request a Quote — MS14183C8