PartsTable
Technical Data Sheet
Download PDF

MS14155-6 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS14155-6: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, hole_diameter: 0.376 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM, outside_diameter: 0.756 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN, style_designator: RECESSED BOTH SIDES, top_recess_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-089-5672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS14155-6
NSN: 5310-01-089-5672
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
hole_diameter0.376 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
outside_diameter0.756 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
style_designatorRECESSED BOTH SIDES
top_recess_angle90.0 DEGREES NOMINAL
surface_treatmentCADMIUM OVERALL
material_thickness0.144 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
bottom_recess_angle90.0 DEGREES NOMINAL
top_recess_diameter0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
bottom_recess_diameter0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059,TY 302,1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
NSN5310-01-089-5672
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS14155-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TOP RECESS DIAMETER: 0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
BOTTOM RECESS DIAMETER: 0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
TOP RECESS ANGLE: 90.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: RECESSED BOTH SIDES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,TY 302,1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.756 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TOP RECESS DIAMETER0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
BOTTOM RECESS DIAMETER0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
TOP RECESS ANGLE90.0 DEGREES NOMINAL
STYLE DESIGNATORRECESSED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,TY 302,1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.756 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
MATERIAL THICKNESS0.144 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
BOTTOM RECESS ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
5310PL2202692Reference document
Same NSN cross-reference
Reference document — Informative reference only
10122108Reference document
Same NSN cross-reference
Reference document — Informative reference only
9387511203Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS14155-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS14155-6?
MS14155-6 is a WASHER,RECESSED.
What parts can replace MS14155-6?
There are 3 known substitutes for MS14155-6: 5310PL2202692, 10122108, 9387511203. Substitute compatibility should be verified for your specific system.
What is the NSN for MS14155-6?
MS14155-6 is cataloged in the U.S. Government catalog under NSN 5310-01-089-5672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS14155-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.