PartsTable
Technical Data Sheet
Download PDF

MS14104-8C — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

MS14104-8C: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_diameter: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, style_designator: WITH INSERT AND/OR LINER, inner_member_width: 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, outer_member_width: 0.3850 INCHES MINIMUM AND 0.3950 INCHES MAXIMUM IN, end_item_identification: F-35 AIRCRAFT SUPPORT EQUIPMENT. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-671-1194, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS14104-8C
NSN: 3120-01-671-1194
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_diameter0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
style_designatorWITH INSERT AND/OR LINER
inner_member_width0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
outer_member_width0.3850 INCHES MINIMUM AND 0.3950 INCHES MAXIMUM IN
end_item_identificationF-35 AIRCRAFT SUPPORT EQUIPMENT
outer_member_outside_diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyBEARING,PLAIN,SELF-LUBRICATING,SELF-ALIGNING,LOW SPEED,NARROW,CHAMFERED OUTER RING,-65 DEG. F TO 325 DEG. F (S/S BY SAE-AS14104)
NSN3120-01-671-1194
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MS14104-8C · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.3850 INCHES MINIMUM AND 0.3950 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITH INSERT AND/OR LINER
•
BORE DIAMETER: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
OUTER MEMBER OUTSIDE DIAMETER: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.3850 INCHES MINIMUM AND 0.3950 INCHES MAXIMUM IN
STYLE DESIGNATORWITH INSERT AND/OR LINER
PART NAME ASSIGNED BY CONTROLLING AGENCYBEARING,PLAIN,SELF-LUBRICATING,SELF-ALIGNING,LOW SPEED,NARROW,CHAMFERED OUTER RING,-65 DEG. F TO 325 DEG. F (S/S BY SAE-AS14104)
END ITEM IDENTIFICATIONF-35 AIRCRAFT SUPPORT EQUIPMENT
BORE DIAMETER0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
OUTER MEMBER OUTSIDE DIAMETER0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS81820Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AS14104Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS14104-8C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS14104-8C?
MS14104-8C is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace MS14104-8C?
There are 2 known substitutes for MS14104-8C: SAE-AS81820, SAE-AS14104. Substitute compatibility should be verified for your specific system.
What is the NSN for MS14104-8C?
MS14104-8C is cataloged in the U.S. Government catalog under NSN 3120-01-671-1194. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS14104-8C