PartsTable
Technical Data Sheet
Download PDF

MS14 1-2 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MS14 1-2: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.8750 INCHES NOMINAL IN, overall_width: 1.0620 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-155-8936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS14 1-2
NSN: 3110-00-155-8936
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.8750 INCHES NOMINAL IN
overall_width1.0620 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter4.5000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data115 TYPE AND 00 GRADE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-155-8936
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS14 1-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 4.5000 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY OVERALL OUTSIDE DIA; AS MODIFIED BY OVERALL WIDTH
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH1.0620 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.5000 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY OVERALL OUTSIDE DIA; AS MODIFIED BY OVERALL WIDTH
NONDEFINITIVE SPEC/STD DATA115 TYPE AND 00 GRADE
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 1
FFB171Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS14 1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS14 1-2?
MS14 1-2 is a BEARING,BALL,ANNULAR.
What parts can replace MS14 1-2?
There is 1 known substitute for MS14 1-2: FFB171. Substitute compatibility should be verified for your specific system.
What is the NSN for MS14 1-2?
MS14 1-2 is cataloged in the U.S. Government catalog under NSN 3110-00-155-8936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS14 1-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.