MS122917 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS122917: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-229-0787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS122917

NSN: 5340-01-229-0787
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
loop_inside_diameter	1.188 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.992 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
NSN	5340-01-229-0787

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.992 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.992 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
LOOP INSIDE DIAMETER	1.188 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

SAE AS122900 THRU AS122939Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy MS122917?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS122917?

MS122917 is a CLAMP,LOOP.

What parts can replace MS122917?

There is 1 known substitute for MS122917: SAE AS122900 THRU AS122939. Substitute compatibility should be verified for your specific system.

What is the NSN for MS122917?

MS122917 is cataloged in the U.S. Government catalog under NSN 5340-01-229-0787. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS122917 — CLAMP,LOOP

Request a Quote — MS122917