PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS 21042-04
MS 21042-04 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNJC, overall_height: 0.103 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-811-6419, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS 21042-04
NSN: 5310-00-811-6419
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNJC
overall_height0.103 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
hardness_rating49.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
washer_thickness0.010 INCHES MINIMUM IN
surface_treatmentCADMIUM OVERALL
width_across_flats0.150 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
NSN5310-00-811-6419
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS 21042-04 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER THICKNESS: 0.010 INCHES MINIMUM IN
•
NUT STYLE: HEXAGON
•
WASHER OUTSIDE DIAMETER: 0.206 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
WIDTH ACROSS FLATS: 0.150 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WASHER THICKNESS0.010 INCHES MINIMUM IN
NUT STYLEHEXAGON
WASHER OUTSIDE DIAMETER0.206 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL HEIGHT0.103 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
NOMINAL THREAD SIZE0.112 INCHES IN
WIDTH ACROSS FLATS0.150 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
THREAD CLASS3B
THREAD QUANTITY PER INCH40
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
80552Interchangeable
interchangeable cross-reference
interchangeable
648195Interchangeable
interchangeable cross-reference
interchangeable
805524Interchangeable
interchangeable cross-reference
interchangeable
FSIIInterchangeable
interchangeable cross-reference
interchangeable
JEFFERSON DMInterchangeable
interchangeable cross-reference
interchangeable
H14L04CWInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS 21042-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS 21042-04?
MS 21042-04 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace MS 21042-04?
There are 12 known substitutes for MS 21042-04: 80552, 648195, 805524 and 9 more. Substitute compatibility should be verified for your specific system.
Is MS 21042-04 still available?
MS 21042-04 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS 21042-04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026