PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MRC214SZZG3
MRC214SZZG3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 70.00 MILLIMETERS NOMINAL MM, overall_width: 24.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-566-8839, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRC214SZZG3
NSN: 3110-00-566-8839
FSC: 3110
CAGE: 83443 — CLIMAX MOLYBDENUM CO A DIV OF AMAX INC (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter70.00 MILLIMETERS NOMINAL MM
overall_width24.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
lubrication_materialGREASE
overall_outside_diameter125.00 MILLIMETERS NOMINAL MM
NSN3110-00-566-8839
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MRC214SZZG3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.3
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
SEAL QUANTITY2
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
BB1225Interchangeable
interchangeable cross-reference
interchangeable
488867G1204Interchangeable
interchangeable cross-reference
interchangeable
321863-51Interchangeable
interchangeable cross-reference
interchangeable
0698-6242Interchangeable
interchangeable cross-reference
interchangeable
101969Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MRC214SZZG3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MRC214SZZG3?
MRC214SZZG3 is a BEARING,BALL,ANNULAR.
What parts can replace MRC214SZZG3?
There are 5 known substitutes for MRC214SZZG3: BB1225, 488867G1204, 321863-51 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MRC214SZZG3?
MRC214SZZG3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-566-8839. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MRC214SZZG3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026