PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MRC214-M
MRC214-M ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 70.00 MILLIMETERS NOMINAL MM, overall_width: 24.0000 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-540-4663, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRC214-M
NSN: 3110-00-540-4663
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter70.00 MILLIMETERS NOMINAL MM
overall_width24.0000 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
lubrication_materialLUBRICANT
overall_outside_diameter125.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-540-4663
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MRC214-M · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: LUBRICANT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LUBRICATION MATERIALLUBRICANT
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL RETAINER
BORE DIAMETER70.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH24.0000 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
100088R91Interchangeable
interchangeable cross-reference
interchangeable
712293Interchangeable
interchangeable cross-reference
interchangeable
47216X1U9Interchangeable
interchangeable cross-reference
interchangeable
182-1156Interchangeable
interchangeable cross-reference
interchangeable
122357-70Interchangeable
interchangeable cross-reference
interchangeable
MT214Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MRC214-M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MRC214-M?
MRC214-M is a BEARING,BALL,ANNULAR.
What parts can replace MRC214-M?
There are 28 known substitutes for MRC214-M: 100088R91, 712293, 47216X1U9 and 25 more. Substitute compatibility should be verified for your specific system.
Is MRC214-M still available?
MRC214-M is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MRC214-M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026