PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MRC-203SD600DT10T1A5PC35LO2
MRC-203SD600DT10T1A5PC35LO2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON RETAINER, bore_diameter: 17.0 MILLIMETERS NOMINAL MM, overall_width: 24.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, special_features: CONTACT ANGLE GREATER THAN 25 DEGREES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-448-5705, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRC-203SD600DT10T1A5PC35LO2
NSN: 3110-01-448-5705
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON RETAINER
bore_diameter17.0 MILLIMETERS NOMINAL MM
overall_width24.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
special_featuresCONTACT ANGLE GREATER THAN 25 DEGREES
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, UNIVERSAL GROUND FACES
overall_outside_diameter40.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMOLDED
NSN3110-01-448-5705
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MRC-203SD600DT10T1A5PC35LO2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, UNIVERSAL GROUND FACES
•
RETAINER FABRICATION METHOD: MOLDED
•
OVERALL OUTSIDE DIAMETER: 40.0 MILLIMETERS NOMINAL MM
•
BORE DIAMETER: 17.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
MATERIALSTEEL OUTER RING
SPECIAL FEATURESCONTACT ANGLE GREATER THAN 25 DEGREES
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, UNIVERSAL GROUND FACES
RETAINER FABRICATION METHODMOLDED
OVERALL OUTSIDE DIAMETER40.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL INNER RING
BORE DIAMETER17.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
MATERIALPLASTIC POLYAMIDE NYLON RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
7203BECBPInterchangeable
interchangeable cross-reference
interchangeable
118733Interchangeable
interchangeable cross-reference
interchangeable
M7203Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MRC-203SD600DT10T1A5PC35LO2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MRC-203SD600DT10T1A5PC35LO2?
MRC-203SD600DT10T1A5PC35LO2 is a BEARING,BALL,DUPLEX.
What parts can replace MRC-203SD600DT10T1A5PC35LO2?
There are 3 known substitutes for MRC-203SD600DT10T1A5PC35LO2: 7203BECBP, 118733, M7203. Substitute compatibility should be verified for your specific system.
Is MRC-203SD600DT10T1A5PC35LO2 still available?
MRC-203SD600DT10T1A5PC35LO2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MRC-203SD600DT10T1A5PC35LO2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026