PartsTable
Technical Data Sheet
Download PDF

MR32CR440-4E — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MR32CR440-4E: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.250 INCHES MINIMUM IN, fastener_length: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-851-7885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MR32CR440-4E
NSN: 5305-00-851-7885
FSC: 5305 — Screws
CAGE: 26233 — NYLOK LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.250 INCHES MINIMUM IN
fastener_length0.250 INCHES NOMINAL IN
locking_featurePELLET THREADS
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-851-7885
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MR32CR440-4E · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.250 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: PELLET THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD LENGTH0.250 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPELLET THREADS
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 1
H76316-0404Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MR32CR440-4E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MR32CR440-4E?
MR32CR440-4E is a SCREW,CAP,SOCKET HEAD.
What parts can replace MR32CR440-4E?
There is 1 known substitute for MR32CR440-4E: H76316-0404. Substitute compatibility should be verified for your specific system.
What is the NSN for MR32CR440-4E?
MR32CR440-4E is cataloged in the U.S. Government catalog under NSN 5305-00-851-7885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MR32CR440-4E