PartsTable
Technical Data Sheet
Download PDF

MR26-11 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MR26-11: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 2330 OVERALL, nut_style: SLEEVE, nut_length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, nut_diameter: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-9812, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MR26-11
NSN: 5310-00-208-9812
FSC: 5310 — Nuts and Washers
CAGE: 76005 — LORD CORPORATION DBA LORD CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 2330 OVERALL
nut_styleSLEEVE
nut_length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
nut_diameter0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
flange_thickness0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.562 INCHES IN
cross-sectional_shapeHEXAGONAL FLANGE
thread_quantity_per_inch18
NSN5310-00-208-9812
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MR26-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
NUT LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
NUT DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
NUT LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
FLANGE THICKNESS0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.562 INCHES IN
NUT DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
CROSS-SECTIONAL SHAPEROUND NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MR26-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MR26-11?
MR26-11 is a NUT,SLEEVE.
What is the NSN for MR26-11?
MR26-11 is cataloged in the U.S. Government catalog under NSN 5310-00-208-9812. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MR26-11