PartsTable
Technical Data Sheet
Download PDF

MR218C401 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MR218C401: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 AND STEEL COMP 8620 INNER RING, bore_shape: STRAIGHT, bore_diameter: 3.5422 INCHES MINIMUM AND 3.5425 INCHES MAXIMUM IN, overall_width: 30.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: NONLOCATING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-891-4985, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MR218C401
NSN: 3110-00-891-4985
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 AND STEEL COMP 8620 INNER RING
bore_shapeSTRAIGHT
bore_diameter3.5422 INCHES MINIMUM AND 3.5425 INCHES MAXIMUM IN
overall_width30.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureNONLOCATING
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
internal_clearance0.0020 INCHES MINIMUM RADIAL AND 0.0030 INCHES MAXIMUM RADIAL IN
overall_outside_diameter160.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
NSN3110-00-891-4985
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MR218C401 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0020 INCHES MINIMUM RADIAL AND 0.0030 INCHES MAXIMUM RADIAL IN
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 160.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0020 INCHES MINIMUM RADIAL AND 0.0030 INCHES MAXIMUM RADIAL IN
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
OVERALL WIDTH30.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER160.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
BORE DIAMETER3.5422 INCHES MINIMUM AND 3.5425 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY BALL
SUBSTITUTES & CROSS-REFERENCES 3
SB2162-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2CE9763Reference document
Same NSN cross-reference
Reference document — Secondary reference
461525Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy MR218C401?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MR218C401?
MR218C401 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace MR218C401?
There are 3 known substitutes for MR218C401: SB2162-2, 2CE9763, 461525. Substitute compatibility should be verified for your specific system.
What is the NSN for MR218C401?
MR218C401 is cataloged in the U.S. Government catalog under NSN 3110-00-891-4985. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MR218C401