PartsTable
Technical Data Sheet
Download PDF

MR206G — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MR206G: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 1.1807 INCHES NOMINAL IN, overall_width: 16.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: ONE DIRECTION. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-681-9725, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MR206G
NSN: 3110-00-681-9725
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter1.1807 INCHES NOMINAL IN
overall_width16.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureONE DIRECTION
style_designatorSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
internal_clearance0.0012 INCHES MINIMUM RADIAL AND 0.0026 INCHES MAXIMUM RADIAL IN
overall_outside_diameter2.4409 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationRBEC NO.1
NSN3110-00-681-9725
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MR206G · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0026 INCHES MAXIMUM RADIAL IN
•
LOCATING FEATURE: ONE DIRECTION
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 2.4409 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0012 INCHES MINIMUM RADIAL AND 0.0026 INCHES MAXIMUM RADIAL IN
LOCATING FEATUREONE DIRECTION
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
OVERALL WIDTH16.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER2.4409 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER1.1807 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
NJ206VAAReference document
Same NSN cross-reference
Reference document — Secondary reference
28959Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MR206G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MR206G?
MR206G is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace MR206G?
There are 2 known substitutes for MR206G: NJ206VAA, 28959. Substitute compatibility should be verified for your specific system.
What is the NSN for MR206G?
MR206G is cataloged in the U.S. Government catalog under NSN 3110-00-681-9725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MR206G

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.