PartsTable
Technical Data Sheet
Download PDF

MR10RS — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MR10RS: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, overall_width: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, alignment_type: RIGID, special_features: 2 OIL HOLES 0.1250 IN. DIA 180 DEGREES APART,IN GROOVE OF OUTER RING IN, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND, overall_outside_diameter: 1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-935-5713, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MR10RS
NSN: 3110-00-935-5713
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 39317 — MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING. (USA)
SPECIFICATIONS
bore_diameter0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
overall_width0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
seal_quantity1
alignment_typeRIGID
special_features2 OIL HOLES 0.1250 IN. DIA 180 DEGREES APART,IN GROOVE OF OUTER RING IN
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-935-5713
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MR10RS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
SEAL QUANTITY: 1
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURES2 OIL HOLES 0.1250 IN. DIA 180 DEGREES APART,IN GROOVE OF OUTER RING IN
SEAL QUANTITY1
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
D303263-26Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MR10RS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MR10RS?
MR10RS is a BEARING,ROLLER,NEEDLE.
What parts can replace MR10RS?
There is 1 known substitute for MR10RS: D303263-26. Substitute compatibility should be verified for your specific system.
What is the NSN for MR10RS?
MR10RS is cataloged in the U.S. Government catalog under NSN 3110-00-935-5713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MR10RS