PartsTable
Technical Data Sheet
PartsTable / O-RING / MPL-2113 NO. 5
MPL-2113 NO. 5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MPL-2113 NO. 5 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1977, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MPL-2113 NO. 5
NSN: 5331-00-165-1977
FSC: 5331 — O-RING
CAGE: 71905 — DERBYSHIRE MACHINE & TOOL CO (USA)
SPECIFICATIONS
Part NumberMPL-2113 NO. 5
NSN5331-00-165-1977
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MPL-2113 NO. 5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
878920Interchangeable
interchangeable cross-reference
interchangeable
HPT0151Interchangeable
interchangeable cross-reference
interchangeable
3-920Interchangeable
interchangeable cross-reference
interchangeable
AS568-920MIL-P- 25732Interchangeable
interchangeable cross-reference
interchangeable
568920-27Interchangeable
interchangeable cross-reference
interchangeable
7052637-06Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MPL-2113 NO. 5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MPL-2113 NO. 5?
MPL-2113 NO. 5 is a MPL-2113 NO. 5.
What parts can replace MPL-2113 NO. 5?
There are 21 known substitutes for MPL-2113 NO. 5: 878920, HPT0151, 3-920 and 18 more. Substitute compatibility should be verified for your specific system.
Is MPL-2113 NO. 5 still available?
MPL-2113 NO. 5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MPL-2113 NO. 5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026