PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MPH-14-SW2/P0C0
MPH-14-SW2/P0C0 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MPH-14-SW2/P0C0 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-126-5191, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MPH-14-SW2/P0C0
NSN: 5330-00-126-5191
FSC: 5330
CAGE: 92021 — IMI CRITICAL ENGR PBM LLC (USA)
SPECIFICATIONS
Part NumberMPH-14-SW2/P0C0
NSN5330-00-126-5191
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MPH-14-SW2/P0C0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
RIM SURFACE WIDTH: 0.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
RIM SURFACE WIDTH0.156 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
SP179Interchangeable
interchangeable cross-reference
interchangeable
4570382-1Interchangeable
interchangeable cross-reference
interchangeable
SP19Interchangeable
interchangeable cross-reference
interchangeable
T#SP19Interchangeable
interchangeable cross-reference
interchangeable
099001Interchangeable
interchangeable cross-reference
interchangeable
SCD5059-37Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MPH-14-SW2/P0C0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MPH-14-SW2/P0C0?
MPH-14-SW2/P0C0 is a MPH-14-SW2/P0C0.
What parts can replace MPH-14-SW2/P0C0?
There are 13 known substitutes for MPH-14-SW2/P0C0: SP179, 4570382-1, SP19 and 10 more. Substitute compatibility should be verified for your specific system.
Is MPH-14-SW2/P0C0 still available?
MPH-14-SW2/P0C0 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MPH-14-SW2/P0C0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026