PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MP30
MP30 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include special_features: 10.4 INCH MONITOR SCREEN (TOUCHSCREEN) IN, end_item_identification: PATIENT MONITORS, part_name_assigned_by_controlling_agency: INTELLIVUE MP20 AND MP30. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-593-9684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MP30
NSN: 3110-00-593-9684
FSC: 3110
CAGE: A0045 — SKF INDUSTRIE SPA (ITA)
SPECIFICATIONS
special_features10.4 INCH MONITOR SCREEN (TOUCHSCREEN) IN
end_item_identificationPATIENT MONITORS
part_name_assigned_by_controlling_agencyINTELLIVUE MP20 AND MP30
NSN3110-00-593-9684
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MP30 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
BORE SMALLEST DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 60.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL BALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
BORE SMALLEST DIAMETER30.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER60.0 MILLIMETERS NOMINAL MM
OVERALL HEIGHT21.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIALSTEEL WASHER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
E59-0001-010Interchangeable
interchangeable cross-reference
interchangeable
51306Interchangeable
interchangeable cross-reference
interchangeable
61306Interchangeable
interchangeable cross-reference
interchangeable
SJ7133Interchangeable
interchangeable cross-reference
interchangeable
HJ101812Interchangeable
interchangeable cross-reference
interchangeable
G380027S1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MP30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MP30?
MP30 is a BEARING,BALL,THRUST.
What parts can replace MP30?
There are 20 known substitutes for MP30: E59-0001-010, 51306, 61306 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MP30?
MP30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-593-9684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MP30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026