PartsTable
Technical Data Sheet
PartsTable / MRO / MP-1507
MP-1507 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC CASE, body_style: SINGLE POLE TYPE, body_width: 0.750 INCHES MAXIMUM IN, bore_shape: STRAIGHT, body_length: 1.187 INCHES MAXIMUM IN, reset_method: MANUAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-6060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MP-1507
NSN: 3110-00-157-6060
FSC: 3110
CAGE: 65092 — SOLARTRON ELECTRONICS INC WESTON INSTRUMENTS DIV (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleSINGLE POLE TYPE
body_width0.750 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
body_length1.187 INCHES MAXIMUM IN
reset_methodMANUAL
storage_typeGENERAL PURPOSE WAREHOUSE
bore_diameter0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
cubic_measure2.255 CUBIC INCHES
pole_quantity1
bushing_length0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
load_directionRADIAL
NSN3110-00-157-6060
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MP-1507 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: SPLIT OUTER RING WITH FLANGED BAND, SOLI D INNER RING EXTENDED ON FLANGE SIDE, NON-SEPARABLE
•
BORE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
•
OUTER RING WIDTH: 0.3125 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OUTER RING OUTSIDE DIAMETER: 0.9060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
MATERIALSTEEL OVERALL
STYLE DESIGNATORSPLIT OUTER RING WITH FLANGED BAND, SOLI D INNER RING EXTENDED ON FLANGE SIDE, NON-SEPARABLE
BORE DIAMETER0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
OUTER RING WIDTH0.3125 INCHES NOMINAL IN
SPECIAL FEATURESINNER OR OUTER RING COMPOSED OF TWO OR MORE PARTS
INTERNAL FIT-UP DESIGNATIONSTANDARD
OUTER RING OUTSIDE DIAMETER0.9060 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
SURFACE FINISHUNGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
5543Interchangeable
interchangeable cross-reference
interchangeable
CA200397Interchangeable
interchangeable cross-reference
interchangeable
9-926-101562Interchangeable
interchangeable cross-reference
interchangeable
A24013-16-23Interchangeable
interchangeable cross-reference
interchangeable
64006Interchangeable
interchangeable cross-reference
interchangeable
7362700Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MP-1507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MP-1507?
MP-1507 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace MP-1507?
There are 16 known substitutes for MP-1507: 5543, CA200397, 9-926-101562 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MP-1507?
MP-1507 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-6060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MP-1507

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026