PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MM6
MM6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REACTOR is a the manufacturer industrial component. Key specifications include material: ALUMINUM CASE, plate_type: POSITIVE, body_length: 0.281 INCHES MAXIMUM IN, cell_quantity: 20, hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-231-4263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MM6
NSN: 5330-00-231-4263
FSC: 5330
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
materialALUMINUM CASE
plate_typePOSITIVE
body_length0.281 INCHES MAXIMUM IN
cell_quantity20
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.062 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
terminal_typeCONNECTOR, PLUG
inclosure_typeFULLY INCLOSED
overall_height3.562 INCHES NOMINAL IN
overall_length6.062 INCHES NOMINAL IN
inductance_typeFIXED
NSN5330-00-231-4263
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MM6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 7.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 9.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTERACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER7.500 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
OUTSIDE DIAMETER9.750 INCHES NOMINAL IN
HOLE DIAMETER0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTERACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
BOLT CIRCLE DIAMETER8.625 INCHES NOMINAL IN
BOLT HOLE QUANTITY12
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
24293Interchangeable
interchangeable cross-reference
interchangeable
MM6Interchangeable
interchangeable cross-reference
interchangeable
M27/240-06Interchangeable
interchangeable cross-reference
interchangeable
BS1373PC32Interchangeable
Same NIIN cross-reference
interchangeable
212-47-02PC32Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MM6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MM6?
MM6 is a REACTOR.
What parts can replace MM6?
There are 5 known substitutes for MM6: 24293, MM6, M27/240-06 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MM6?
MM6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-231-4263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MM6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026