PartsTable
Technical Data Sheet
Download PDF

MM110525 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

MM110525: MICROCIRCUIT,DIGITAL.

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, body_height: 0.030 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, body_length: 0.240 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, element_length: 10.000 FEET NOMINAL FT, special_features: INCL PROTECTION CAP AT EACH END, termination_type: CONNECTOR RECEPTACLE. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-418-7112, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MM110525
NSN: 4730-01-418-7112
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 39239 — M & M CONTROL SERVICE INC (USA)
SPECIFICATIONS
body_width0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
body_height0.030 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
body_length0.240 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
element_length10.000 FEET NOMINAL FT
special_featuresINCL PROTECTION CAP AT EACH END
termination_typeCONNECTOR RECEPTACLE
features_providedHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND ASYNCHRONOUS AND EDGE TRIGGERED AND SYNCHRONOUS
output_logic_formDIODE-TRANSISTOR LOGIC
inclosure_materialCERAMIC AND GLASS
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
fsc_application_dataAORCRAFT
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
NSN4730-01-418-7112
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MM110525 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 2
89613-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
6509860Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MM110525?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MM110525?
MM110525 is a MICROCIRCUIT,DIGITAL.
What parts can replace MM110525?
There are 2 known substitutes for MM110525: 89613-1, 6509860. Substitute compatibility should be verified for your specific system.
What is the NSN for MM110525?
MM110525 is cataloged in the U.S. Government catalog under NSN 4730-01-418-7112. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MM110525

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.