PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MM-7222-0-E/5

MM-7222-0-E/5 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include bore_diameter: 1.3780 INCHES NOMINAL IN, overall_width: 0.7087 INCHES NOMINAL IN, overall_outside_diameter: 2.4409 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-362-8887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MM-7222-0-E/5
NSN: 3110-01-362-8887
FSC: 3110
CAGE: 28208 — HEPBURN ENGINEERING INC (CAN)
SPECIFICATIONS
bore_diameter1.3780 INCHES NOMINAL IN
overall_width0.7087 INCHES NOMINAL IN
overall_outside_diameter2.4409 INCHES NOMINAL IN
NSN3110-01-362-8887
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MM-7222-0-E/5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.4409 INCHES NOMINAL IN
•
BORE DIAMETER: 1.3780 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.7087 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.4409 INCHES NOMINAL IN
BORE DIAMETER1.3780 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
51207Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-2692Interchangeable
interchangeable cross-reference
interchangeable
LS-28049-5Interchangeable
interchangeable cross-reference
interchangeable
LS-28049 REVISION HInterchangeable
interchangeable cross-reference
interchangeable
RE15472Interchangeable
interchangeable cross-reference
interchangeable
1207Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MM-7222-0-E/5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MM-7222-0-E/5?
MM-7222-0-E/5 is a BEARING,BALL,THRUST.
What parts can replace MM-7222-0-E/5?
There are 8 known substitutes for MM-7222-0-E/5: 51207, MIL-F-2692, LS-28049-5 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MM-7222-0-E/5?
MM-7222-0-E/5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-362-8887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MM-7222-0-E/5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026