PartsTable
Technical Data Sheet
Download PDF

MLT8S-CP — STRAP,LINE SUPPORTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MLT8S-CP: STRAP,LINE SUPPORTING.

The STRAP,LINE SUPPORTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 BUCKLE, strap_width: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, strap_length: 27.190 INCHES NOMINAL IN, buckle_length: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, strap_thickness: 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN, antiabrasion_pad: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-223-1745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MLT8S-CP
NSN: 5340-01-223-1745
FSC: 5340 — Hardware, Commercial
CAGE: 06383 — PANDUIT CORP. (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 BUCKLE
strap_width0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
strap_length27.190 INCHES NOMINAL IN
buckle_length0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
strap_thickness0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
antiabrasion_padNOT INCLUDED
style_designatorBUNDLE TYPE
surface_treatmentPASSIVATE BUCKLE
buckle_overall_width0.205 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
material_document_and_classificationAISI 302 ASSN STD SINGLE MATERIAL RESPONSE OR AISI 304 ASSN STD SINGLE MATERIAL RESPONSE STRAP
surface_treatment_document_and_classificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BUCKLE
NSN5340-01-223-1745
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MLT8S-CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRAP WIDTH: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BUCKLE
•
BUCKLE LENGTH: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BUNDLE TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 302 ASSN STD SINGLE MATERIAL RESPONSE OR AISI 304 ASSN STD SINGLE MATERIAL RESPONSE BUCKLE
•
BUCKLE OVERALL WIDTH: 0.205 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE BUCKLE
TECHNICAL CHARACTERISTICS
STRAP WIDTH0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BUCKLE
BUCKLE LENGTH0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
STYLE DESIGNATORBUNDLE TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 302 ASSN STD SINGLE MATERIAL RESPONSE OR AISI 304 ASSN STD SINGLE MATERIAL RESPONSE BUCKLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 302 ASSN STD SINGLE MATERIAL RESPONSE OR AISI 304 ASSN STD SINGLE MATERIAL RESPONSE STRAP
BUCKLE OVERALL WIDTH0.205 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE BUCKLE
STRAP THICKNESS0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
STRAP LENGTH27.190 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
11466605Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MLT8S-CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MLT8S-CP?
MLT8S-CP is a STRAP,LINE SUPPORTING.
What parts can replace MLT8S-CP?
There is 1 known substitute for MLT8S-CP: 11466605. Substitute compatibility should be verified for your specific system.
What is the NSN for MLT8S-CP?
MLT8S-CP is cataloged in the U.S. Government catalog under NSN 5340-01-223-1745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MLT8S-CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.