MLS100EU4-2 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MLS100EU4-2: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING, heat_treatment: AS FABRICATED OVERALL, shank_diameter: 0.123 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-165-8499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MLS100EU4-2

NSN: 5320-00-165-8499
FSC: 5320 — Rivets
CAGE: 29666 — HUCK MFG CO (USA)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
shank_style	SELF-PLUGGING
heat_treatment	AS FABRICATED OVERALL
shank_diameter	0.123 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
fastener_length	0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
expansion_device	SERRATED STEM-TYPE W
countersink_angle	98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM
head_major_diameter	0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
material_document_and_classification	AISI 660 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN	5320-00-165-8499

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.123 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

HEAT TREATMENT: AS FABRICATED OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: AISI 660 MFR REF SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN

•

SHANK STYLE: SELF-PLUGGING

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.123 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
FASTENER LENGTH	0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
HEAT TREATMENT	AS FABRICATED OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AISI 660 MFR REF SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING
COUNTERSINK ANGLE	98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 4

663674Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

CR2653-4-2Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

MLS100-EU04-02Reference document

Same NSN cross-reference

Reference document — Secondary reference

665444Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MLS100EU4-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MLS100EU4-2?

MLS100EU4-2 is a RIVET,BLIND.

What parts can replace MLS100EU4-2?

There are 4 known substitutes for MLS100EU4-2: 663674, CR2653-4-2, MLS100-EU04-02 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MLS100EU4-2?

MLS100EU4-2 is cataloged in the U.S. Government catalog under NSN 5320-00-165-8499. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MLS100EU4-2 — RIVET,BLIND

Request a Quote — MLS100EU4-2