PartsTable
Technical Data Sheet
Download PDF

ML620-37 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ML620-37: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, nut_style: SLEEVE, nut_length: 0.580 INCHES NOMINAL IN, nut_diameter: 0.219 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-373-4953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ML620-37
NSN: 5310-00-373-4953
FSC: 5310 — Nuts and Washers
CAGE: 55482 — MOUNT LOK PRODUCTS INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
nut_styleSLEEVE
nut_length0.580 INCHES NOMINAL IN
nut_diameter0.219 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_diameter0.341 INCHES NOMINAL IN
flange_thickness0.062 INCHES NOMINAL IN
special_features2 NOTCHES IN FLANGE
thread_directionRIGHT-HAND
nominal_thread_size0.164 INCHES IN
cross-sectional_shapeROUND OVERALL
NSN5310-00-373-4953
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ML620-37 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.341 INCHES NOMINAL IN
•
NUT LENGTH: 0.580 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.062 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.219 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUND OVERALL
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.341 INCHES NOMINAL IN
NUT LENGTH0.580 INCHES NOMINAL IN
FLANGE THICKNESS0.062 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.219 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND OVERALL
SPECIAL FEATURES2 NOTCHES IN FLANGE
NUT STYLESLEEVE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
00265-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ML620-37?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ML620-37?
ML620-37 is a NUT,SLEEVE.
What parts can replace ML620-37?
There is 1 known substitute for ML620-37: 00265-12. Substitute compatibility should be verified for your specific system.
What is the NSN for ML620-37?
ML620-37 is cataloged in the U.S. Government catalog under NSN 5310-00-373-4953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ML620-37