PartsTable
Technical Data Sheet
Download PDF

MKP37B-006M — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MKP37B-006M: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_diameter: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, load_direction: RADIAL, inner_ring_width: 0.4345 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, outer_ring_width: 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-495-4804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MKP37B-006M
NSN: 3110-01-495-4804
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
load_directionRADIAL
inner_ring_width0.4345 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_ring_width0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
style_designatorSINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE
surface_treatmentCADMIUM OVERALL
internal_clearance0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
end_item_identificationHELICOPTER, LAMPS MARK III, SH-60B
self-alignment_locationINTERNAL
NSN3110-01-495-4804
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MKP37B-006M · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 3
38950-00908-104Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MKP37B-A1174Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
38950-00908Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy MKP37B-006M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MKP37B-006M?
MKP37B-006M is a BEARING,BALL,AIRFRAME.
What parts can replace MKP37B-006M?
There are 3 known substitutes for MKP37B-006M: 38950-00908-104, MKP37B-A1174, 38950-00908. Substitute compatibility should be verified for your specific system.
What is the NSN for MKP37B-006M?
MKP37B-006M is cataloged in the U.S. Government catalog under NSN 3110-01-495-4804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MKP37B-006M