PartsTable
Technical Data Sheet

MIS-20076/1-004 — MIS-20076/1-004

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MIS-20076/1-004: MIS-20076/1-004.

The MIS-20076/1-004 is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 6145-01-181-9376, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MIS-20076/1-004
NSN: 6145-01-181-9376
FSC: 6145 — Wire and Cable, Electrical
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
special_featuresFLAMMABILITY REQUIRESMENTS SHALL BE I/A/W MIL-DTL-13486; THE MATERIALS USED IN THE CONSTRUCTION OF THE CABLE SHALL BE FUNGUS INERT I/A/W MIL-HDBK-454, GUIDELINE 4
NSN6145-01-181-9376
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: MIS-20076/1-004 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIAL TEST FEATURES: FOR EMP PROTECTION, THE SHIELD SHALL PROVIDE A CURRENT ATTENUATION OF 60 DB MINIMUM FOR A CABLE LENGTH OF ONE METER OVER THE FREQUENCY RANGE OF 200 KHZ TO 10 MHZ AND SHALL DECREASE ABOVE 10 MHZ AT THE RATE OF 20 DB PER DECADE TO A MINIMUM OF 46 DB AT 50 MHZ MHz
TECHNICAL CHARACTERISTICS
SPECIAL TEST FEATURESFOR EMP PROTECTION, THE SHIELD SHALL PROVIDE A CURRENT ATTENUATION OF 60 DB MINIMUM FOR A CABLE LENGTH OF ONE METER OVER THE FREQUENCY RANGE OF 200 KHZ TO 10 MHZ AND SHALL DECREASE ABOVE 10 MHZ AT THE RATE OF 20 DB PER DECADE TO A MINIMUM OF 46 DB AT 50 MHZ MHz
SPECIAL FEATURESFLAMMABILITY REQUIRESMENTS SHALL BE I/A/W MIL-DTL-13486; THE MATERIALS USED IN THE CONSTRUCTION OF THE CABLE SHALL BE FUNGUS INERT I/A/W MIL-HDBK-454, GUIDELINE 4
OTHER ITEMS IN FSC 6145 — Wire and Cable, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6145-00-000-0090 6145-00-000-0095 6145-00-001-1281 6145-00-001-3002 6145-00-001-4504 6145-00-001-5158 6145-00-001-5159 6145-00-001-5160
SUBSTITUTES & CROSS-REFERENCES 2
TD-98Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIS-20076Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MIS-20076/1-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIS-20076/1-004?
MIS-20076/1-004 is a MIS-20076/1-004. It is classified as a MRO (MRO_GENERAL).
What parts can replace MIS-20076/1-004?
There are 2 known substitutes for MIS-20076/1-004: TD-98, MIS-20076. Substitute compatibility should be verified for your specific system.
What is the NSN for MIS-20076/1-004?
MIS-20076/1-004 is cataloged in the U.S. Government catalog under NSN 6145-01-181-9376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIS-20076/1-004