PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILV24332GRB1 1-2 250-15-30F
MILV24332GRB1 1-2 250-15-30F ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The VALVE,SAFETY RELIEF is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 922 BODY, bonnet_type: INSIDE SPRING, flange_shape: ROUND WITH HOLES ALL ENDS, style_designator: ANGLE, features_provided: PRESSURE TIGHT OUTLET SIDE, nominal_thickness: 0.812 INCHES ALL ENDS IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-038-7018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILV24332GRB1 1-2 250-15-30F
NSN: 4820-00-038-7018
FSC: 4820
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialCOPPER ALLOY 922 BODY
bonnet_typeINSIDE SPRING
flange_shapeROUND WITH HOLES ALL ENDS
style_designatorANGLE
features_providedPRESSURE TIGHT OUTLET SIDE
nominal_thickness0.812 INCHES ALL ENDS IN
bolt_hole_quantity6 ALL ENDS
flange_face_designPLAIN ALL ENDS
operating_pressure250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
flow_control_deviceDISK
maximum_operating_temp70.0 FAHRENHEIT SINGLE RESPONSE DEGF
NSN4820-00-038-7018
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: MILV24332GRB1 1-2 250-15-30F · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BONNET ATTACHMENT METHOD: THREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA276,TYPE303 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
•
FEATURES PROVIDED: PRESSURE TIGHT OUTLET SIDE
•
FLANGE FACE DESIGN: PLAIN ALL ENDS
•
STYLE DESIGNATOR: ANGLE
•
NOMINAL THICKNESS: 0.812 INCHES ALL ENDS IN
•
TEST DATA DOCUMENT: 81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
OPERATING PRESSURE: 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
BONNET ATTACHMENT METHODTHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA276,TYPE303 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
FEATURES PROVIDEDPRESSURE TIGHT OUTLET SIDE
FLANGE FACE DESIGNPLAIN ALL ENDS
STYLE DESIGNATORANGLE
NOMINAL THICKNESS0.812 INCHES ALL ENDS IN
TEST DATA DOCUMENT81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MATERIALCOPPER ALLOY 922 BODY
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA276,TYPE303 ASSN STD SINGLE MATERIAL RESPONSE SEAT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
918Interchangeable
interchangeable cross-reference
interchangeable
803-2177518-12XX-34Interchangeable
interchangeable cross-reference
interchangeable
20-318Interchangeable
interchangeable cross-reference
interchangeable
150-619FFPC318Interchangeable
interchangeable cross-reference
interchangeable
SW106 FIND 5Interchangeable
interchangeable cross-reference
interchangeable
20212PC5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILV24332GRB1 1-2 250-15-30F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILV24332GRB1 1-2 250-15-30F?
MILV24332GRB1 1-2 250-15-30F is a VALVE,SAFETY RELIEF.
What parts can replace MILV24332GRB1 1-2 250-15-30F?
There are 18 known substitutes for MILV24332GRB1 1-2 250-15-30F: 918, 803-2177518-12XX-34, 20-318 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILV24332GRB1 1-2 250-15-30F?
MILV24332GRB1 1-2 250-15-30F is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-038-7018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILV24332GRB1 1-2 250-15-30F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026