PartsTable
Technical Data Sheet
Download PDF

MILV17547TYPEBCLASS1 — VALVE,CHECK

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

MILV17547TYPEBCLASS1: VALVE,CHECK.

The VALVE,CHECK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 922 OVERALL, flange_shape: ROUND WITH HOLES ALL ENDS, connection_type: FLANGE ALL ENDS, style_designator: ANGLE, mounting_position: VERTICAL, nominal_thickness: 0.500 INCHES ALL ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 4820-00-064-2270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILV17547TYPEBCLASS1
NSN: 4820-00-064-2270
NIINs: 000642270, 002688782
FSC: 4820 — Valves, Nonpowered
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY 922 OVERALL
flange_shapeROUND WITH HOLES ALL ENDS
connection_typeFLANGE ALL ENDS
style_designatorANGLE
mounting_positionVERTICAL
nominal_thickness0.500 INCHES ALL ENDS IN
bolt_hole_quantity6 ALL ENDS
flange_face_designPLAIN ALL ENDS
operating_pressure100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceDISK
valve_operation_methodAUTOMATIC
media_for_which_designedWATER, FRESH SECOND RESPONSE
NSN4820-00-064-2270
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: MILV17547TYPEBCLASS1 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
FLANGE SHAPE: ROUND WITH HOLES ALL ENDS
•
FLANGE FACE DESIGN: PLAIN ALL ENDS
•
BOLT CIRCLE NOMINAL DIAMETER: 5.000 INCHES ALL ENDS IN
•
STYLE DESIGNATOR: STRAIGHT THRU
•
BOLT HOLE NOMINAL DIAMETER: 0.562 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 1 CLASS
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
FLANGE SHAPEROUND WITH HOLES ALL ENDS
FLANGE FACE DESIGNPLAIN ALL ENDS
BOLT CIRCLE NOMINAL DIAMETER5.000 INCHES ALL ENDS IN
STYLE DESIGNATORSTRAIGHT THRU
BOLT HOLE NOMINAL DIAMETER0.562 INCHES ALL ENDS IN
OPERATING PRESSURE100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NONDEFINITIVE SPEC/STD DATAB TYPE AND 1 CLASS
NOMINAL OUTSIDE DIAMETER6.125 INCHES ALL ENDS IN
BOLT HOLE QUANTITY6 ALL ENDS
SUBSTITUTES & CROSS-REFERENCES 1
MIL-V-17547Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MILV17547TYPEBCLASS1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILV17547TYPEBCLASS1?
MILV17547TYPEBCLASS1 is a VALVE,CHECK.
What parts can replace MILV17547TYPEBCLASS1?
There is 1 known substitute for MILV17547TYPEBCLASS1: MIL-V-17547. Substitute compatibility should be verified for your specific system.
What is the NSN for MILV17547TYPEBCLASS1?
MILV17547TYPEBCLASS1 is cataloged in the U.S. Government catalog under NSN 4820-00-064-2270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILV17547TYPEBCLASS1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.