PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILV17360FIG5
MILV17360FIG5 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include diameter: 0.127 INCHES NOMINAL IN, material: STEEL OVERALL, eye_length: 1.250 INCHES NOMINAL IN, head_style: EYE, special_features: 1.750 IN. LOOP CLOSED EYE HEAD IN, style_designator: STRAIGHT.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-372-0871, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILV17360FIG5
NSN: 5315-00-372-0871
FSC: 5315
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.127 INCHES NOMINAL IN
materialSTEEL OVERALL
eye_length1.250 INCHES NOMINAL IN
head_styleEYE
special_features1.750 IN. LOOP CLOSED EYE HEAD IN
style_designatorSTRAIGHT
surface_treatmentCADMIUM OVERALL
under_head_length1.250 INCHES NOMINAL IN
eye_stock_diameter0.127 INCHES NOMINAL IN
loop_inside_diameter0.890 INCHES NOMINAL IN
NSN5315-00-372-0871
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MILV17360FIG5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.127 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
UNDER HEAD LENGTH: 1.250 INCHES NOMINAL IN
•
EYE LENGTH: 1.250 INCHES NOMINAL IN
•
HEAD STYLE: EYE
•
EYE STOCK DIAMETER: 0.127 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.890 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.127 INCHES NOMINAL IN
SPECIAL FEATURES1.750 IN. LOOP CLOSED EYE HEAD IN
SURFACE TREATMENTCADMIUM OVERALL
UNDER HEAD LENGTH1.250 INCHES NOMINAL IN
EYE LENGTH1.250 INCHES NOMINAL IN
HEAD STYLEEYE
EYE STOCK DIAMETER0.127 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.890 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
528350Interchangeable
interchangeable cross-reference
interchangeable
1-480305-0Interchangeable
interchangeable cross-reference
interchangeable
20-122253Interchangeable
interchangeable cross-reference
interchangeable
20-671Interchangeable
interchangeable cross-reference
interchangeable
D1020230Interchangeable
interchangeable cross-reference
interchangeable
44111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILV17360FIG5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILV17360FIG5?
MILV17360FIG5 is a PIN,STRAIGHT,HEADED.
What parts can replace MILV17360FIG5?
There are 20 known substitutes for MILV17360FIG5: 528350, 1-480305-0, 20-122253 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILV17360FIG5?
MILV17360FIG5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-372-0871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILV17360FIG5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026