PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILT960DTYPE2SERIES600
MILT960DTYPE2SERIES600 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The TRAP,STEAM is a the manufacturer industrial component. Key specifications include material: STEEL BODY, body_design: STRAIGHT PATTERN, design_type: PULSATING, furnished_items: STRAINER, flange_thickness: 0.687 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, special_features: 0.500 IN. STRAINER BLOWOUT CONNECTION,WELDED SEAT TYPE IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-801-9027, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILT960DTYPE2SERIES600
NSN: 4730-00-801-9027
FSC: 4730
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL BODY
body_designSTRAIGHT PATTERN
design_typePULSATING
furnished_itemsSTRAINER
flange_thickness0.687 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
special_features0.500 IN. STRAINER BLOWOUT CONNECTION,WELDED SEAT TYPE IN
flange_facing_typeRAISED LOCATION NOT OTHERWISE SPECIFIED
inlet_connection_typeFLANGED
outlet_connection_typeSOCKET WELDING
flange_outside_diameter4.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
flange_bolt_hole_diameter0.687 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
flange_bolt_hole_quantity4 LOCATION NOT OTHERWISE SPECIFIED
NSN4730-00-801-9027
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: MILT960DTYPE2SERIES600 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RATED CAPACITY AT MAXIMUM WORKING PRESSURE: 3000.000 POUNDS OF WATER PER HOUR LBS
•
INLET CONNECTION TYPE: SOCKET WELDING
•
FURNISHED ITEMS: STRAINER
•
MAXIMUM STEAM WORKING PRESSURE: ERR-060
•
BODY DESIGN: STRAIGHT PATTERN
•
OUTLET CONNECTION TYPE: SOCKET WELDING
•
DESIGN TYPE: PULSATING
TECHNICAL CHARACTERISTICS (FLIS)
RATED CAPACITY AT MAXIMUM WORKING PRESSURE3000.000 POUNDS OF WATER PER HOUR LBS
INLET CONNECTION TYPESOCKET WELDING
FURNISHED ITEMSSTRAINER
MAXIMUM STEAM WORKING PRESSUREERR-060
BODY DESIGNSTRAIGHT PATTERN
OUTLET CONNECTION TYPESOCKET WELDING
SPECIAL FEATURESA 0.500 IN. BLOWDOWN CONNECTION,WELDED SEAT TYPE IN
DESIGN TYPEPULSATING
MATERIALSTEEL BODY
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 600 SERIES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
4120Interchangeable
interchangeable cross-reference
interchangeable
434-0283-000Interchangeable
interchangeable cross-reference
interchangeable
MS35214-10Interchangeable
interchangeable cross-reference
interchangeable
459272Interchangeable
interchangeable cross-reference
interchangeable
504Interchangeable
interchangeable cross-reference
interchangeable
10232738Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILT960DTYPE2SERIES600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILT960DTYPE2SERIES600?
MILT960DTYPE2SERIES600 is a TRAP,STEAM.
What parts can replace MILT960DTYPE2SERIES600?
There are 22 known substitutes for MILT960DTYPE2SERIES600: 4120, 434-0283-000, MS35214-10 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILT960DTYPE2SERIES600?
MILT960DTYPE2SERIES600 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-801-9027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILT960DTYPE2SERIES600

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026