MILS971TYPEE — SCREW,WOOD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

MILS971TYPEE: SCREW,WOOD.

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL, head_style: ROUND, head_height: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, head_diameter: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN, fastener_length: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, internal_drive_style: CROSS RECESS TYPE 1. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-015-0859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MILS971TYPEE

NSN: 5305-00-015-0859
NIINs: 000150859, 000150919, 000150964, 000150967, 000150970
FSC: 5305 — Screws
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
head_style	ROUND
head_height	0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
head_diameter	0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
fastener_length	0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
internal_drive_style	CROSS RECESS TYPE 1
nonmachine_thread_style	GIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter	0.190 INCHES IN
NSN	5305-00-015-0859

COMPONENT DIAGRAM

KEY FEATURES

•

NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN

•

HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN

•

NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 3RD MATERIAL RESPONSE OVERALL

•

HEAD STYLE: ROUND

•

INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1

•

MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL

TECHNICAL CHARACTERISTICS

NONMACHINE NOMINAL THREAD DIAMETER	0.138 INCHES IN
HEAD HEIGHT	0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
FASTENER LENGTH	0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NONMACHINE THREAD STYLE	GIMLET POINT (TYPE A, AB OR BA)
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 3RD MATERIAL RESPONSE OVERALL
HEAD STYLE	ROUND
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL	COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
HEAD DIAMETER	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 4

150859Reference document

Same NSN cross-reference

Reference document — Secondary reference

FFS111Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

MS35493-228Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS35495-224Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MILS971TYPEE?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MILS971TYPEE?

MILS971TYPEE is a SCREW,WOOD.

What parts can replace MILS971TYPEE?

There are 4 known substitutes for MILS971TYPEE: 150859, FFS111, MS35493-228 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MILS971TYPEE?

MILS971TYPEE is cataloged in the U.S. Government catalog under NSN 5305-00-015-0859. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MILS971TYPEE — SCREW,WOOD

Request a Quote — MILS971TYPEE