PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILS6807
MILS6807 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include shaft_type: ROUND, SQUARE, THREADED HOLE SINGLE ACTUATOR, flat_height: 0.216 INCHES NOMINAL SINGLE ACTUATOR IN, shaft_length: 1.000 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2B SINGLE MOUNTING FACILITY, overall_width: 2.810 INCHES NOMINAL IN, pole_quantity: 1 EACH SECTION FRONT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5930-00-243-6052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILS6807
NSN: 5930-00-243-6052
FSC: 5930
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
shaft_typeROUND, SQUARE, THREADED HOLE SINGLE ACTUATOR
flat_height0.216 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length1.000 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2B SINGLE MOUNTING FACILITY
overall_width2.810 INCHES NOMINAL IN
pole_quantity1 EACH SECTION FRONT
terminal_typeTAB, SOLDER LUG
thread_length0.469 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height2.810 INCHES NOMINAL IN
overall_length3.937 INCHES NOMINAL IN
shaft_diameter0.245 INCHES MINIMUM AND 0.249 INCHES MAXIMUM SINGLE ACTUATOR IN
throw_quantity8 EACH SECTION REAR
NSN5930-00-243-6052
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN MILS6807 MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
STYLE DESIGNATOR: TAP, CIRCULAR, BUSHING MOUNT
•
THROW QUANTITY: 7 EACH SECTION REAR
•
THREAD SERIES DESIGNATOR: UNS SINGLE MOUNTING FACILITY
•
PRECIOUS MATERIAL AND LOCATION: TERMINAL SCREW SURFACES SILVER
•
TEST DATA DOCUMENT: 81349-MIL-S-6807 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
CONTACT LOAD CURRENT RATING: 5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
•
PRECIOUS MATERIAL: SILVER
•
DETENT ROTATIONAL TORQUE RANGE: +3.000 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORTAP, CIRCULAR, BUSHING MOUNT
THROW QUANTITY7 EACH SECTION REAR
THREAD SERIES DESIGNATORUNS SINGLE MOUNTING FACILITY
PRECIOUS MATERIAL AND LOCATIONTERMINAL SCREW SURFACES SILVER
TEST DATA DOCUMENT81349-MIL-S-6807 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CONTACT LOAD CURRENT RATING5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
PRECIOUS MATERIALSILVER
DETENT ROTATIONAL TORQUE RANGE+3.000 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN
SWITCH ACTUATOR POSITIONING INCREMENT45.0 DEGREES SINGLE ACTUATOR
SHAFT FLAT/SLOT ANGULAR LOCATION0.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MILS6807Interchangeable
interchangeable cross-reference
interchangeable
308P194Interchangeable
interchangeable cross-reference
interchangeable
7262K12Interchangeable
interchangeable cross-reference
interchangeable
7263K13Interchangeable
interchangeable cross-reference
interchangeable
MS25002-3Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-6807Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILS6807?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILS6807?
MILS6807 is a CAPACITOR,FIXED,CERAMIC DIELECTR.
What parts can replace MILS6807?
There are 26 known substitutes for MILS6807: MILS6807, 308P194, 7262K12 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILS6807?
MILS6807 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5930-00-243-6052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILS6807

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026