PartsTable
Technical Data Sheet
PartsTable / MRO / MILR94B
MILR94B ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, switch_type: ROTARY, shaft_length: 0.500 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-577-9748, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MILR94B
NSN: 5905-00-577-9748
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
switch_typeROTARY
shaft_length0.500 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
overall_length0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
shaft_diameter0.125 INCHES NOMINAL IN
mounting_methodLOCKING BUSHING
fragility_factorMODERATELY RUGGED
overall_diameter0.953 INCHES MAXIMUM IN
NSN5905-00-577-9748
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN MILR94B MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
MAXIMUM STOP TORQUE: 128.00 INCH-OUNCES IN
•
ACTUATOR TYPE: SINGLE SHAFT
•
POWER DISSIPATION RATING PER SECTION IN WATTS: 1.0 FREE AIR SINGLE SECTION
•
TEST DATA DOCUMENT: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER: 70.0 SINGLE SECTION
•
SPECIFICATION/STANDARD DATA: 81349-MIL-R-94/4 GOVERNMENT SPECIFICATION
•
RESISTANCE TOLERANCE PER SECTION IN PERCENT: -10.0 TO 10.0 SINGLE SECTION
•
TERMINAL LOCATION: RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM STOP TORQUE128.00 INCH-OUNCES IN
ACTUATOR TYPESINGLE SHAFT
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
SPECIFICATION/STANDARD DATA81349-MIL-R-94/4 GOVERNMENT SPECIFICATION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
NONTURN DEVICE RADIUS0.422 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
SCREW THREAD DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
95-0388Interchangeable
interchangeable cross-reference
interchangeable
830303Interchangeable
interchangeable cross-reference
interchangeable
21098Interchangeable
interchangeable cross-reference
interchangeable
6879HInterchangeable
interchangeable cross-reference
interchangeable
324A122Interchangeable
interchangeable cross-reference
interchangeable
352-1639Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILR94B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR94B?
MILR94B is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace MILR94B?
There are 29 known substitutes for MILR94B: 95-0388, 830303, 21098 and 26 more. Substitute compatibility should be verified for your specific system.
Is MILR94B still available?
MILR94B is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR94B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026