PartsTable
Technical Data Sheet
PartsTable / MRO / MILR94A
MILR94A ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-418-4376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MILR94A
NSN: 5905-00-418-4376
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
overall_length0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
shaft_diameter0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
mounting_methodLOCKING BUSHING
overall_diameter0.953 INCHES MAXIMUM IN
section_quantity1
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
NSN5905-00-418-4376
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN MILR94A MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
TERMINAL LOCATION: RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
•
POWER DISSIPATION RATING PER SECTION IN WATTS: 2.0 FREE AIR SINGLE SECTION
•
TEST DATA DOCUMENT: 81349-MILR94A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER: 40.0 SINGLE SECTION
•
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
•
ACTUATOR TRAVEL CONTROL FEATURE: CONTINUOUS MOTION
•
RESISTANCE TOLERANCE PER SECTION IN PERCENT: -10.0 TO 10.0 SINGLE SECTION
TECHNICAL CHARACTERISTICS (FLIS)
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
TEST DATA DOCUMENT81349-MILR94A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
OVERALL LENGTH1.812 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG309.0 MINIMUM AND 320.0 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
MILR94AInterchangeable
interchangeable cross-reference
interchangeable
RV4LATSA105BInterchangeable
interchangeable cross-reference
interchangeable
416037-15Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-94/5Interchangeable
interchangeable cross-reference
interchangeable
RV4NAYSK101AInterchangeable
interchangeable cross-reference
interchangeable
JAIN040S503UAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILR94A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR94A?
MILR94A is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace MILR94A?
There are 13 known substitutes for MILR94A: MILR94A, RV4LATSA105B, 416037-15 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR94A?
MILR94A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-418-4376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR94A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026