PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILR6130BTYIIGR AC0WDFIRM
MILR6130BTYIIGR AC0WDFIRM ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 21.000 INCHES NOMINAL IN, cross-sectional_width: 0.125 INCHES NOMINAL IN, cross-sectional_height: 0.500 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR, material_document_and_classification: MIL-R-6130 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-024-5209, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILR6130BTYIIGR AC0WDFIRM
NSN: 5330-01-024-5209
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
length21.000 INCHES NOMINAL IN
materialRUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER POLYISOPRENE NATURAL CLASS NR LOCATION NOT OTHERWISE SPECIFIED
cross-sectional_width0.125 INCHES NOMINAL IN
cross-sectional_height0.500 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-R-6130 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5330-01-024-5209
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILR6130BTYIIGR AC0WDFIRM MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 21.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER POLYISOPRENE NATURAL CLASS NR LOCATION NOT OTHERWISE SPECIFIED
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH21.000 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER POLYISOPRENE NATURAL CLASS NR LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6130 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
61J10905-80Interchangeable
interchangeable cross-reference
interchangeable
SF39Interchangeable
interchangeable cross-reference
interchangeable
SC4-2 7/16Interchangeable
interchangeable cross-reference
interchangeable
SC4-2Interchangeable
interchangeable cross-reference
interchangeable
012-1007-000Interchangeable
interchangeable cross-reference
interchangeable
012-1007-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILR6130BTYIIGR AC0WDFIRM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR6130BTYIIGR AC0WDFIRM?
MILR6130BTYIIGR AC0WDFIRM is a RUBBER STRIP.
What parts can replace MILR6130BTYIIGR AC0WDFIRM?
There are 12 known substitutes for MILR6130BTYIIGR AC0WDFIRM: 61J10905-80, SF39, SC4-2 7/16 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR6130BTYIIGR AC0WDFIRM?
MILR6130BTYIIGR AC0WDFIRM is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-024-5209. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR6130BTYIIGR AC0WDFIRM

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026