Name: RESISTOR,VARIABLE,WIRE WOUND,NON
Brand: Unknown
SKU: MILR39015-2

MILR39015-2 ✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.205 INCHES NOMINAL IN, body_height: 0.515 INCHES NOMINAL IN, body_length: 0.500 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-006-5480, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MILR39015-2

NSN: 5905-00-006-5480
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES
body_width	0.205 INCHES NOMINAL IN
body_height	0.515 INCHES NOMINAL IN
body_length	0.500 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
bearing_type	SLEEVE SHAFT
shaft_length	0.045 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
cubic_measure	0.051 CUBIC INCHES
overall_width	0.205 INCHES NOMINAL IN
overall_height	0.662 INCHES MINIMUM IN
overall_length	0.555 INCHES MAXIMUM IN
NSN	5905-00-006-5480

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT STYLE: ROUND, SLOTTED

•

RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.100

•

BODY LENGTH: 0.500 INCHES NOMINAL IN

•

TEST DATA DOCUMENT: 81349-MILR39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

•

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL: 0.100 INCHES NOMINAL IN

•

MOUNTING METHOD: TERMINAL

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

POWER DISSIPATION RATING PER SECTION IN WATTS: 0.75 FREE AIR SINGLE SECTION

TECHNICAL CHARACTERISTICS (FLIS)

SHAFT STYLE	ROUND, SLOTTED
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100
BODY LENGTH	0.500 INCHES NOMINAL IN
TEST DATA DOCUMENT	81349-MILR39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL IN
MOUNTING METHOD	TERMINAL
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
TERMINAL LOCATION	LEFT ADJACENT SIDE TWO ROWS LOCATION NOT OTHERWISE SPECIFIED
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION

VERIFIED SUBSTITUTES & CROSS-REFERENCES 12

10198940Interchangeable