PartsTable
Technical Data Sheet
Download PDF

MILR3533-014ES — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MILR3533-014ES: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, center_hole_diameter: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING, material_document_and_classification: MIL-R-3533,TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-035-1904, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILR3533-014ES
NSN: 5330-01-035-1904
FSC: 5330 — Packing and Gasket Materials
CAGE: H2313 — ERIKS B.V. (NLD)
SPECIFICATIONS
materialRUBBER OVERALL
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
center_hole_diameter0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
material_document_and_classificationMIL-R-3533,TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-035-1904
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILR3533-014ES MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-3533,TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-3533,TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
10119577Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy MILR3533-014ES?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR3533-014ES?
MILR3533-014ES is a PACKING,PREFORMED.
What parts can replace MILR3533-014ES?
There is 1 known substitute for MILR3533-014ES: 10119577. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR3533-014ES?
MILR3533-014ES is cataloged in the U.S. Government catalog under NSN 5330-01-035-1904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR3533-014ES

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.