PartsTable
Technical Data Sheet
Download PDF

MILR3241ATYPEN0D — DEVELOPER,PHOTOGRAPHIC

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MILR3241ATYPEN0D: DEVELOPER,PHOTOGRAPHIC.

The DEVELOPER,PHOTOGRAPHIC is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 17.344 INCHES MAXIMUM IN, flange_diameter: 19.250 INCHES NOMINAL IN, inside_traverse: 17.000 INCHES NOMINAL IN, surface_treatment: PAINT, shaft_hole_diameter: 1.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 8130-00-253-0106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILR3241ATYPEN0D
NSN: 8130-00-253-0106
FSC: 8130 — Reels and Spools
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL
overall_width17.344 INCHES MAXIMUM IN
flange_diameter19.250 INCHES NOMINAL IN
inside_traverse17.000 INCHES NOMINAL IN
surface_treatmentPAINT
shaft_hole_diameter1.312 INCHES NOMINAL IN
core_outside_diameter6.772 INCHES NOMINAL IN
purpose_for_which_designedGENERAL
nondefinitive_spec/std_dataDR-5 TYPE
NSN8130-00-253-0106
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DEVELOPER,PHOTOGRAPHIC TITLE COMPONENT PN MILR3241ATYPEN0D MFR DEVELOPER,PHOTOGRAPHIC
KEY FEATURES
•
FLANGE DIAMETER: 19.250 INCHES NOMINAL IN
•
SHAFT HOLE DIAMETER: 1.312 INCHES NOMINAL IN
•
INSIDE TRAVERSE: 17.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: DR-5 TYPE
•
SURFACE TREATMENT: PAINT
•
MATERIAL: STEEL
•
PURPOSE FOR WHICH DESIGNED: GENERAL
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER19.250 INCHES NOMINAL IN
SHAFT HOLE DIAMETER1.312 INCHES NOMINAL IN
OVERALL WIDTH17.344 INCHES MAXIMUM IN
INSIDE TRAVERSE17.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATADR-5 TYPE
SURFACE TREATMENTPAINT
MATERIALSTEEL
PURPOSE FOR WHICH DESIGNEDGENERAL
CORE OUTSIDE DIAMETER6.772 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
DR5Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-R-3241 TY DR-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MILR3241TYPEDR5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MILR3241ATYPEN0D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR3241ATYPEN0D?
MILR3241ATYPEN0D is a DEVELOPER,PHOTOGRAPHIC.
What parts can replace MILR3241ATYPEN0D?
There are 3 known substitutes for MILR3241ATYPEN0D: DR5, MIL-R-3241 TY DR-5, MILR3241TYPEDR5. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR3241ATYPEN0D?
MILR3241ATYPEN0D is cataloged in the U.S. Government catalog under NSN 8130-00-253-0106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR3241ATYPEN0D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.