PartsTable
Technical Data Sheet
Download PDF

MILR3065RR5415 — RUBBER STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MILR3065RR5415: RUBBER STRIP.

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 11.062 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR, surface_condition: SMOOTH BOTH SIDES, fabrication_method: SOLID, cross-sectional_width: 0.125 INCHES NOMINAL IN, cross-sectional_height: 0.187 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-382-5742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILR3065RR5415
NSN: 5330-00-382-5742
FSC: 5330 — Packing and Gasket Materials
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
length11.062 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR
surface_conditionSMOOTH BOTH SIDES
fabrication_methodSOLID
cross-sectional_width0.125 INCHES NOMINAL IN
cross-sectional_height0.187 INCHES NOMINAL IN
environmental_protectionOIL RESISTANT
minimum_tensile_strengthERR-060
cross-sectional_shape_styleRECTANGULAR
nonmetallic_hardness_rating65.0 MINIMUM SHORE DUROMETER A AND 75.0 MAXIMUM SHORE DUROMETER A
material_document_and_classificationMIL-STD-417, TYPE S, CLASS SC, GRADE SC720A1B1E3 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5330-00-382-5742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILR3065RR5415 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 11.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.187 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: ERR-060
•
CROSS-SECTIONAL WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-417, TYPE S, CLASS SC, GRADE SC720A1B1E3 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE CONDITION: SMOOTH BOTH SIDES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
COLOR: BLACK BOTH SIDES
TECHNICAL CHARACTERISTICS
LENGTH11.062 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.187 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTHERR-060
CROSS-SECTIONAL WIDTH0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-417, TYPE S, CLASS SC, GRADE SC720A1B1E3 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE CONDITIONSMOOTH BOTH SIDES
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
COLORBLACK BOTH SIDES
ENVIRONMENTAL PROTECTIONOIL RESISTANT
MATERIALRUBBER CHLOROPRENE CLASS CR
SUBSTITUTES & CROSS-REFERENCES 3
MILR3065Reference document
Same NSN cross-reference
Reference document — Identification reference
232877Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILR3065CLASSSC717EABReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MILR3065RR5415?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR3065RR5415?
MILR3065RR5415 is a RUBBER STRIP.
What parts can replace MILR3065RR5415?
There are 3 known substitutes for MILR3065RR5415: MILR3065, 232877, MILR3065CLASSSC717EAB. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR3065RR5415?
MILR3065RR5415 is cataloged in the U.S. Government catalog under NSN 5330-00-382-5742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR3065RR5415